Please Install Flash Player
Download from here
 

Why Only “ Sun Ray “? On ETC

Home » Why Only â Sun Ray â? On ETC

Always believing in new developments & changes for positive purpose, the sunray may have various characteristics like
  • Manufactured and fabricated from high grade of material under qualified engineers’ inspection at its own factory.


  • The Evacuated glass tube solar system is more efficient than flat plat solar collector because of its round shape, as the sunrays falls perpendicular any time, so the Evacuated glass tube solar system get the temperature faster than flat plat collector, and because of vacuum between the tubes, the heat loss during the cold night is very low than flat plat collector, so this system maintain the temperature overnight.

    Key Technical Details for System Installation

    Require Area
  • 3.5 Sq meters / 100 liters,

  • Bright sunshine is necessary between 9 a.m. & 4 p.m. to get optimum results.


  • Ideal Water: Less than 150-ppm total hardness.

    Roof Loading Requirements
    45 kg/ 125 liter system over 4 Sq. meter area, 1200 kg/ 1000 liters of storage tank, spread over 28 Sq. meters area 2600 Kg / 2000 liters of storage tank, spread over 70 Sq. meters.

    Over Head Tank – The Minimum Height
  • Domestic Systems: 1.5 Mtr. From bottom of the tank.

  • Industrial Systems: 3 Mtr. From bottom of the tank.


  • Temperature Range: 60 c to 85 c. (Depends upon availability of solar radiations)

    The Capacity
  • Domestic: 25 liters/day/person.

  • Industrial: 500-3000 liters / day thermosyphon, 3000 liters / day to any capacity – Forced flow.


  • Usage
  • Bathing

  • Washing and Cleaning

  • Boiler feed

  • Industrial canteens

  • Industrial processing

  • Swimming pool heating etc.

  • Hospitals, hostels, hotels, etc…




  • Key Technical Details for Vacuum Tube

    Outer tube diameter47 mm
    Inner tube diameter 37 mm
    Tube Length1500 / 1800mm
    Glass thickness1.6 mm
    Material borosilicate 3.3 glass
    Absorptive coatinggraded AL-N/AL
    Vacuum<5*10-3Pa
    Absorptance>92%(Am1.5)
    Emittance <8%(80ºC)
    Thermal expansion3.3*10-6ºC
    Stagnation temperature>200ºC
    Heat loss<0.8w/sqm
    Maximum strength0.8MPa

    Calculation of Energy & Amount Saved On ETC


    1 person = 1 bucket of hot water (Minimum) (about 20 liter) per day (600C)
    1 bucket of hot water = 1 unit (minimum) of electricity = 1 KWh = Rs. 4.50
    So, 5 persons = 5 unit per day = 5 x Rs.4.50/- = Rs. 22.5/- per day
    Savings after 1 year = 345days x Rs.22.5/- = Rs.7760/- per year

    (Below results are achieved by various practicals and testings done by us. Results may alter at different conditions, so no guarantee for above figures)


    Capacity In LPD(Properties)12515020003000
    Cold Water Temperature250C250C250C250C
    Hot Water Temperature700C700C700C700C
    Difference In Temperature450C450C450C450C
    Energy From Sunray Solar Heater (Capacity x Temp Difference)(K. Cal.)5625675090000135000
    Electricity Saved Per Day By Sunray6.58105156
    Annual Saving Of Electricity(Rs 4/Unit) 345 DaysRs. 8970Rs. 11000Rs. 145000Rs. 215000
    After 10 Years Total SavingRs. 89700Rs. 110000Rs. 1450000Rs. 2150000

    Select Language:

    Flag English